PRODUCTS RANGE

Expand All | Contact All

Workshop Machines - Drill Machines

Pillar Drilling Machine

We offer Pillar Drilling Machine that is made up of high grade C.I., M.S. Bar, etc. using advanced technology. The Pillar Drilling Machine, we offer, is used by varied industries for diverse drilling requirements. This Pillar Drilling Machine is loaded with varied advanced features and thus is greatly demanded by the clients.

MODEL HPS – 40/1
Machine Capacity 40mm
Column Diameter 130mm
Centre of Spindle to Column 305mm
Distance of Spindle to Table 515mm
Distance Spindle to Base 1040mm
Spindle Nose MT-4
Spindle Travel 215mm
Range of Spindle Speed 90/1000 RPM
No.of Spindle Speed 8
Range of Power Feed (2)0.08 0.04
Table Size 435x435mm
Base Size (Machine area) 490x470mm
Overall Height with guard 2130mm
Main Electrical motor 2 Speed : 1.75/2.5 HP
Shipping Case LxWxH 925x650x2330 mm
MODEL HPS – 4 MODEL HPS – 4/A/2
Machine Capacity 32 mm 40 mm
Column Diameter 114 mm 130 mm
Centre of Spindle to
Column
280 mm 305 mm
Distance of Spindle to
Table
625 mm 515 mm
Distance Spindle to Base 1045 mm 1040 mm
Spindle Nose MT – 3 MT-4
Spindle Travel 170 mm 215 mm
Range of Spindle Speed 75/2070 RPM 75/2070 RPM
No. of Spindle Speed 8 8
Range of Power Feed Manual (2) 0.08 0.04
Table Size 390 x390 mm 435×435 mm
Base Size (Machine area) 390 x390 mm 490×470 mm
V-Belt Section B-58 B-62
Overall Height with guard 1745 mm 1830 mm
Main Electrical Motor 1.5 HP 1.5 HP
Shipping Case LxWxH 1050x600x1900 mm 1140x650x1950 mm

MODEL NO. HPS-P-1
Drilling Cap. (in steel) 25 mm
Column Dia. 87.60 mm
Centre of Spindle to Column 250 mm
Max.spindle to table 600 mm
Max. spindle to base 980 mm
Taper in spindle M.T.3
Spindle Travel 250 mm
No. of speed 8
Range of speed 73 to 1800 RPM
Table size. 375 mm Dia.
Base size (machined area) 350 x 325 mm
Overall base size 625 x 420 mm
Overall height with guard 1675 mm
V-Belt section B-52
Elec. Motor – 1440 RPM 1 H.P.
Wooden Case Size L x W x H 650 x 500 x 1525 mm

Sl. No. SPECIFICATION. 20 mm 13 mm
1.Drilling Capacity. 20 MM 13 MM
2.Spindle Speed 8 Nos. in R.P.M. 86-154-260-460-617-1100-1880-3360 500-950-1625-2825
3.Spindle Nose. Morse Taper No. 2. 6 J. Tapper
4.Spindle Centre to Column. 203 mm 153 mm
5.Spindle Travel. 130 mm 75 mm
6.Max. Distance Spindle to Table. 940 MM 193 MM
7.Max. Distance Spindle to Base. 1240 MM 425 MM
8.Working Surface of Base. 300×275 MM 210×190 MM
9.Working Surface of Table. 280×277 MM 210×207 MM
10.Column Diameter. 73.8 MM 47 MM
11.Machine Base. 295×275 mm 352×225 mm
12.Overall Dimension 1800x380x690 mm 930x400x400 mm
13.Motor Speed. 1440 R.P.M. 1440 R.P.M.
14.Motor 3 Phase Induction A.C. 0.55 Kw/0.75 HP. 0.37 Kw/0.5 HP.
15.Weight of Machine (Approx) 110 Kgs. 42 Kgs.

 

All Geared Radial Drill Machine

HPSM’ manufactures, exports, and supplies Heavy Duty All Geared Radial Drilling Machine. These Geared Radial Drilling Machines are manufactured in compliance with the international standards by our skilled experts. The Geared Radial Drilling Machine, we offer, is manufactured using high-grade components & parts that ensure perfect drilling for large and small jobs. Moreover, the Geared Radial Drilling Machine can be availed at affordable rate.

Design Feature

  1. Main spindle made from EN Steel with 6 slots in machined by hobber and Morse taper bore is provided internally grinded.
  2. By Simple adjustment of only tapper wedge facility to set drill head on are guide way. Spindle sleeve is properly guided in honed drill head bore on 6 ball & roller bearing for smooth & accurate running.
  3. Main spindle made from EN Steel with 6 slots in machined by hobber and Morse taper bore is provided internally grinded.
  4. By Simple adjustment of only tapper wedge facility to set drill head on are guide way. Spindle sleeve is properly guided in honed drill head bore on 6 ball & roller bearing for smooth & accurate running.
  5. This machine has drilling radius up‐to 820 mm and Distance from base to spindle is up‐to 1040 mm. Due to such facilities we are able to provide good working area at low cost.

Standard Equipments

  1. Motor Pulley 2 Nos
  2. Drill Drift
  3. Oil Can

Extra Equipments

  1. Box‐Table
  2. Electrical Motors & Control Panel
  3. V‐belts
  4. Coolant Pump with Tank & Fittings

 

Technical Specifications HPS – 25
CAPACITY C.I.
Drilling Capacity 25mm
   
DRILL HEAD  
1. Spindle Nose MT – 3
2. Spindle Travel 200mm
3. No. of Spindle Speed 8
4. Range of spindle Speed 80-1800RPM
   
POWER  
Spindle Drive Motor 1HP 1440 RPM
Spindle Drive V-Belt B-45
   
WORKING TABLE  
L x W x H 250 x 200 x 200mm
   
WORKING RANGE  
1. Maximum Drill Head Travel 355mm
2. Distance from Column to Spindle Max. / Min. 655 / 300mm
3. Distance from base to spindle Max. /Min. 880 / 175mm
4. Diameter of column. 130mm
   
BASE PLATE  
1. L x W x H 1005 x 605 x 125mm
2. G.W./ N.W  
3. Wooden Case Size L x W x H 1100 x 700 x 1800mm

 

Technical Specifications HPS-38
CAPACITY  
Drilling Capacity 38mm
   
DRILL HEAD  
Morse Taper of Spindle MT – 4
Spindle Stroke 200mm
No. of Spindle Speed 8
Range of spindle Speed 73-1800RPM
POWER V-BELTS
Spindle Drive Motor        
(1.5hp)
B-46
Arm Elevating Motor       
(0.5hp)
A-23
WORKING TABLE  
L x W x H 300 x 260 x 260mm
   
WORKING RANGE  
Drilling Radius Max./Min. 820/320mm
Distance from Column to Spindle Max. / Min. 745/250mm
Max. Drilling Head Travel 495
Distance from base to spindle Max. /Min. 1040/250mm
Diameter of column 157mm
   
BASE PLATE (WITH COOLANT TANK)  
L x W x H 1225 x 675 x 135mm
Working Surface (L x W) 740/550mm
No. of slots / Size 3/16mm
   
DIMENSION  
Overall Height 2050
Wooden Case (L X W X H) 1300 X 750 X 2050mm

All Geared Radial Drilling Machine HPS-5(40MM)

Technical Specifications HPS-5(40MM)
Description Capacity & Size
   
Capacity  
Drilling Capacity in MS 40 mm
Drilling Capacity in CI 45 mm
Tapping in MS 25 mm
Rough Boring in MS 60 mm
   
Drill Head  
Spindle Nose Tapper MT – 4
Spindle Travel 170 mm
Number of Spindle Speed 8
Range of Spindle Speed 60 to 100 RPM
Number of Power Feed 2
Range of Power Feed 0.20 – 0. 10 mm Rev
   
Working Range  
Drilling Radius Max/Min
Distance from column to spindle Max/Min 950 440 mm
Distance from spindle base Max/Min 1150 – 320
Diameter of column 180 mm
Box Table LXWXH 380 x 300 x 300
   
Base Plate  
Base Plate Area LXWXH 1350 x 760 x 160
Working Surface 870 x 630
Number of Size of  T-Slot 3 / 16 mm
   
Power  
Drilling Motor ( Two Speed ) 2 / 1400 Hp / RPM [50 Cycle]
  2 / 2800 Hp / RPM [50 Cycle]
Elevation Motor for ARM 0.5 Hp / 1400 Hp / RPM [50 Cycle]
Shipping Size Approx LXWXH 1750 x 1000 x 2000

All Geared Radial Drilling Machine ( HPS 45 )

Technical Specifications HPS-45 (45MM)
Capacity  
Drilling Capacity 45 mm
   
Drilling Head  
Spindle Nose MT – 4
Spindle Travel 200 mm
Number of Spindle Speeds 8
Spindle Speed Range 60 – 1350 rpm
No. of  Power Feeds 3
Power Feeds Range 0.10-0.20-0.30 mm / rev

All Geared Radial Drilling Machine HPS 50/1350 (50mm)

Technical Specifications
Capacity HPS-50/1350 (50mm)
Drilling (M.S.) 50 mm
Drilling (C.I.) 60 mm
Tapping (M.S.) 24 mm
Tapping (C.I.) 30 mm
Boring (M.S.) 90 mm
Boring (C.I.) 100 mm
   
Drilling Head  
Spindle Tapper MT-5
Spindle Diameter 85
Spindle Travel 300
No of Speed 8
Range of Speed 30 to 1300
No. of Spindle Feeds 6
Range of Spindle Feeds 0.6 to 0.4 mm / rev.
   
Electricals  
Power Supply 3 Ph, 415 V, 50 Hz
Drill Power 3 Hp
Arm Elevating Motor Power 1.5 Hp
Coolant Pump Motor Power 0.15 Hp
   
Working Range  
Column Dia 255
Drilling Radius Max./Min. 1325 / 445
Distance from Column to Spindle Max/Min 1200 / 320
Distance from base to spindle Max/Min 1210 / 400
Max. Drilling Head Travel 880
Vertical Traveling of Arm 880
Base Plate working area (L x W) 1220 x 770
Box Table area (L x W x H) 600 x 500 x 500
   
Diamensions  
Base Plate (L x W x H) 1750 x 950 x 220
No. of  T – Slot 4
Over all Dimensions (L x W x H) 1800 x 1000 x 2450
Wooden case size (L x W x H)  
Approximate Weight 2500 Kg.

All Geared Radial Drilling Machine HPS-65B(65mm)

Technical Specifications HPS-65B
DRILL HEAD  
Drilling Capacity(in steel/in cast iron) 65/75
Drilling Depth 325
Taper Spindle Nose Socket MT-5
No. of Spindle 12(18-810)
No. of Spindle Feeds 6(0.125to1.25)
Drill Power 3.7 KW
CAPACITY  
Drilling Radius
Max(A)
Min(B)

1700
500

Drilling Head Traverse (C) 1200
Distance Base Plate to Spindle
Max. (P)
Min. (M)
1500
300
Diameter of Column Sleeve (D) 8
Range of Speed 355
Working Surface of the Base Plate G*H 1500*1020
DIMENSIONS OF BASE PLATE  
Length*width*Height(T*U*V) 2265*1040*225