PRODUCTS RANGE

Expand All | Contact All

Workshop Machines - Hacksaw Machines

Hack Saw Machine

HPSM’ deals with latest technologies based cutting machines that have been designed to make industrial tasks easier, faster and error free. We are a renowned manufacturer, supplier and exporter of Hacksaw Machines which are appreciated for their smooth & swift functioning ability, high efficiency, fine cutting and long lasting trouble free service, durability, reasonable rates.

STANDARD ACCESSORIES

Introduction

“Matchless” Brand Hydraulic Control Hacksaw Machine has been designed to cut quickly & accurately all material from nickel chrome steel to plastic, controls are simple & easy. An automatic cut out operates at the completion of the operation & The bow slide returns to the top position, The machines has attractive appearance.

Saw Frame

“Matchless” Brand Hydraulic Control Hacksaw Machine has been designed to cut quickly & accurately all material from nickel chrome steel to plastic, controls are simple & easy. An automatic cut out operates at the completion of the operation & The bow slide returns to the top position, The machines has attractive appearance.

Speed

Two speeds has been provided in order to make it suitable for all metals. High speed for metals like mild steel, brass, copper etc and low speed for cast iron.

Vice

The vice is rigid construction. The one jaw remains fixed while other can be adjusted according to the size of the material to be cut.

Electricals

Push button starter is fitted with an adjustable trip mechansim which stops the machine soon after the blade is clear from work at extra cost.

Bed

The bed is of rigid casting with a wide through for collection of coolant, swarf & also houses the V-belts device, bed is single piece casting.

The Drive

The drive is given to the machine through V-Pullys with provision to adjust fully the tension of the V-Belts. The shafts are fitted with taper and ball bearings which eliminate friction.

Feed Saw

Feed saw is controlled hydraulically by two levers provided at the dash-pot. One controls the rate of feed, while the other enables the bow slide to be raised or lowered and the motor gets switched off on completion of the cut.

Coolant

The coolant tank is totally enclosed in the machine base with a constant speed pump which continuously supplies coolant to the saw blade.

 

Technical Specifications
Model HPS-175 HPS-200 HPS-250 HPS-300 HPS-350 HPS-400 HPS-500 HPS-600
Cap. of Round Bar 175 200 250 300 350 400 500 600
Cap. of Square Bar 125 150 200 250 275 325 350 425
Stroke 135 135 140 140 140 135 150 150
Strokes per min. (approx) 100-120 100-120 85-100 85-100 85-100 70-85 70-85 70-85
Blade Size 12″-14″ 14″-16″ 16″-18″ 18″-20″ 20″-22″ 18″-24″ 24″-35″ 30″-36″
Electric Motor 1 H.P. 1 H.P. 2 H.P. 2 H.P. 2 H.P. 3 H.P. 5 H.P. 5 H.P.
RPM of Motor 1440 1440 1440 1440 1440 1440 960 960
Length 1000 1000 1150 1250 1300 1500 1650 1750
Width 600 600 625 650 650 675 700 725
Height 800 800 1000 1000 1100 1200 1300 1400
Weight (approx.) 325 kg. 335 kg. 450 Kg. 550 kg. 650 Kg. 750 kg. 1100 Kg. 1200 Kg.
Weight with Packing 400 kg. 450 kg. 550 Kg. 650 kg. 775 Kg. 900 Kg. 1300 Kg. 1400 Kg.
V-Belts Required 4 Pcs. 4 Pcs. 4 Pcs. 4 Pcs 4 Pcs 5 Pcs 6  Pcs 6 Pcs

 

 

 

Semi Hydraulic Hacksaw Machine

We are highly occupied in providing a broad series of Hydraulic Hacksaw Machine. All these provided machines are recognised for their top performance. The provided machines are manufactured using the sophisticated material, obtained from the industry allowed dealers. Due to high demand, we provide these machines in different specifications that meet on customers demand. In addition, these machines can also be manufactured as per clients’ requirements.

Technical Specifications
PARTICULARS BEARING/BUSH MODLE
CUTTING CAP.(ROUND) 175MM 7″)
CUTTING CAP.(SQUARE) 150MM 6″)
BLADE SIZE 350MM/25MM (14″/1″)
CUTTING CAP. AT 45 125MM (5″)
STROCK ADJESTMANT 88MM X 175MM (3.5″X7″)
JAW SIZE (TWO) 88MM X 100MM(3.5″X4″)
ELEC. MOTOR 1 H.P (1440 R.P.M.)
V-BALT SIZE A-46, A-33, A-25