One of the leading manufacturer, supplier and exporter of all geared head lathe machines we understand the customer values and their exposers. With the help of our experienced engineers, we are able to design and develop a wide range of All Gear Head Lathe Machine. Our Machine is best acclaimed for components like industry driving costs, stringently tried, quality guaranteed, and so on. Gears are made from alloy steel & are hardened & precision ground.
2V & 2 flat type made of close grained cast iron. Robust and heavily ribbed walls with wide openings to facilitate easy flow of chips. Guideways are hardened and precision ground stopping.
- Feed Box
Universal feed box to coulometric Module inch & D.P. Threads.
- Safety Devices
Emergency switch for instantaneous thermal overload relay for electrical system. Mechanical over load tripping for feeds. Shear key for end gears & shear pin lead interlock for simultaneous start of feeds & thread cutting wipers for guide ways.
- Main Spindle
Made from alloy steel hardened & ground. Supported by precision taper roller bearings.
- Head Stock
All geared type. Gears are made from alloy steel & are hardened & precision ground.
- Tail Stock
Moves on “V’ & flat guide of the bed. Cross movements is incorporated for turning of slight tapers.
Provided with full length cross slide & taper wedge to adjust sliding clearance.
- 4 jaw Independent Dog-Chuck with Back Plate
- 3 Jaw Self Centering Chuck with Back Plate
- Quick Change Tool Post
- Telescopic Taper Turning Attachment
- Electric magnetic Brake
- Splash Guard
- Rear Tool Post
- Rapid Traverse of Slide
- Machine Lamp
- Steady Rest
- Follow Rest
- Face Plate
- Tool Post Grinder
- Revolving Centre
- Electric Motor with Control Panel
- Headstock’s and Tailstock’s Dead Centre
- Thread Dial Indicator
- Quick Change Gear Box
- Square Tool Post
- Driving Plate
- Set of Spanners & Keys
- Instruction Manual
|Technical Specifications (IN MM)|
|Model||Model 200||Model 300||Model 400||Model 450||Model 500||Model 600|
|Height of Centre||200||300||400||450mm||500mm||600mm|
|Swing over bed||400||600||800||880mm||980mm||1150mm|
|Swing over cross slide||260||325||530||610mm||660mm||760mm|
|Swing in gap||600||865||1200||1300mm||1350mm||1600mm|
|Distance between centries||750 mm, 1000 mm, 1500 mm||1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm||1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm||2000mm,2500mm ,
|2500mm, 3000mm, 3500mm,
|Main spindle speeds no.||8 Nos.||8 Nos.||9 Nos.||8 Nos.||8 Nos.||8 Nos.|
|Range of Spindle||45-1000 RPM||30-720 RPM||30-720 RPM||25-75rpm||25-75rpm||25-75rpm|
|Speeds (RPM)||52 mm||62 mm||90 mm||52 mm||62 mm||90 mm|
|Threads & Feeds|
|Metric Threads||0.5-6 mm||1-14 mm||1-14 mm||1-14mm||1-14 mm||1-14 mm|
|Withworth Threads TPI||4-60 TPI||2-30 TPI||2-30 TPI||2-30 tpi||2-30 tpi||2-30 tpi|
|D.P. threads||6-80 dp||6-80 dp||6-80 dp|
|Thread of Lead Screw||4 TPI||2 TPI||2 TPI||2 tpi||2 tpi||2 tpi|
|No. Of Feeds||30||30||30||30||30||30|
|Range of long feed||0.20 to 3.0mm/rev||0.20 to 3.0mm/rev||0.20 to 3.0mm/rev|
|Range of Transverse feed||0.03 to 0.50mm/rev||0.03 to 0.50mm/rev||0.03 to 0.50mm/rev|
|Tailstock Sleeve Taper||3 mt||4 mt||5 mt||5 mt||5 mt||5 mt|
|Spindle diameter||50 mm||62 mm||75 mm||95mm||95mm||95mm|
|Electricals||2 HP 1440 RPM 3 Phase||3 HP 1440 RPM 3 Phase||5 HP 1440 RPM 3 Phase||7.5 hp 1440 rpm 3 ph||10hp 1440 rpm 3 ph||10hp 1440 rpm 3 ph|