HPSM’ Cross Shaft Presses are single point gap frame presses with fabricated steel frame, cast slide and bolster. It is designed for either automatic or hand-fed general stamping applications such as blanking, piercing, forming, drawing, bending, etc.
| Technical Specifications | |||||||||
| Tonnage | 32 | 40 | 63 | 80 | 100 | 160 | 200 | 250 | |
| Rated distance before B.D.C | mm | 3.5 | 4 | 5 | 80 | 5 | 6.3 | 6.3 | 6.3 |
| Numbers of slide strokes | SPM | 60 | 60 | 55 | 5 | 45 | 40 | 40 | 35 |
| Fly Wheel energy | Kj | 4.4 | 8 | 16.75 | 50 | 25 | 55 | 70 | 80 |
| Stroke fixed | mm | 80 | 88 | 100 | 20 | 125 | 160 | 200 | 200 |
| Throat depth | mm | 210 | 235 | 285 | 100 | 325 | 385 | 410 | 410 |
| Shut height | mm | 250 | 275 | 300 | 305 | 325 | 400 | 450 | 475 |
| Slide adjustment | mm | 63 | 70 | 70 | 70 | 80 | 100 | 100 | 125 |
| Slide area(L-R×F-B) | mm | 350*250 | 400*350 | 500*400 | 500*400 | 600*450 | 710*600 | 900*800 | 900*800 |
| Boister area(L-R×F-B) | mm | 630*400 | 800*450 | 900*550 | 950*575 | 1000*630 | 1120*750 | 1250*800 | 1250*800 |
| Boister thickness | mm | 75 | 75 | 90 | 0 | 90 | 120 | 150 | 150 |
| Bed Opening (L-R×F-B) | mm | 315*224 | 355*250 | 400*280 | 450*325 | 500*355 | 560*450 | 630*450 | 630*500 |
| Clear distance b/w uprights | mm | 420 | 500 | 590 | 625 | 670 | 775 | 900 | |
| Main Motor | KW×RPM | 2.2*1440 | 3.7*1440 | 5.5*1440 | 5.5*1440 | 7.5*1440 | 15*1440 | 15*1440 | 18.5*1440 |
| Height from floor to top of boister | mm | 800 | 850 | 850 | 850 | 850 | 900 | 900 | 900 |
| Required air pressure | ATM | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 |
| Die cushion model | MI 32 | MI 63 | MI 80 | MI 100 | MI 160 | MI 200 | MI 250 | ||
| Die Cushion : | |||||||||
| Force | KN | 17 | 44 | 70 | 80 | 100 | 200 | 200 | 270 |
| Stroke length | mm | 50 | 50 | 60 | 50 | 50 | 75 | 100 | 100 |
| Pressure pad area | mm | 290*200 | 290*200 | 380*260 | 425*300 | 475*330 | 535*330 | 600*425 | 600*475 |
| Required air pressure | ATM | 7 | 7 | 7 | 7 | 7 | 7 | 7 | 7 |