Workshop Machines – Drill Machines
Pillar Drilling Machine
We offer Pillar Drilling Machine that is made up of high grade C.I., M.S. Bar, etc. using advanced technology. The Pillar Drilling Machine, we offer, is used by varied industries for diverse drilling requirements. This Pillar Drilling Machine is loaded with varied advanced features and thus is greatly demanded by the clients.
| MODEL HPS – 40/1 | |
| Machine Capacity | 40mm |
| Column Diameter | 130mm |
| Centre of Spindle to Column | 305mm |
| Distance of Spindle to Table | 515mm |
| Distance Spindle to Base | 1040mm |
| Spindle Nose | MT-4 |
| Spindle Travel | 215mm |
| Range of Spindle Speed | 90/1000 RPM |
| No.of Spindle Speed | 8 |
| Range of Power Feed | (2)0.08 0.04 |
| Table Size | 435x435mm |
| Base Size (Machine area) | 490x470mm |
| Overall Height with guard | 2130mm |
| Main Electrical motor | 2 Speed : 1.75/2.5 HP |
| Shipping Case LxWxH | 925x650x2330 mm |
| MODEL HPS – 4 | MODEL HPS – 4/A/2 | |
| Machine Capacity | 32 mm | 40 mm |
| Column Diameter | 114 mm | 130 mm |
| Centre of Spindle to Column | 280 mm | 305 mm |
| Distance of Spindle to Table | 625 mm | 515 mm |
| Distance Spindle to Base | 1045 mm | 1040 mm |
| Spindle Nose | MT – 3 | MT-4 |
| Spindle Travel | 170 mm | 215 mm |
| Range of Spindle Speed | 75/2070 RPM | 75/2070 RPM |
| No. of Spindle Speed | 8 | 8 |
| Range of Power Feed | Manual | (2) 0.08 0.04 |
| Table Size | 390 x390 mm | 435×435 mm |
| Base Size (Machine area) | 390 x390 mm | 490×470 mm |
| V-Belt Section | B-58 | B-62 |
| Overall Height with guard | 1745 mm | 1830 mm |
| Main Electrical Motor | 1.5 HP | 1.5 HP |
| Shipping Case LxWxH | 1050x600x1900 mm | 1140x650x1950 mm |
| MODEL NO. | HPS-P-1 |
| Drilling Cap. (in steel) | 25 mm |
| Column Dia. | 87.60 mm |
| Centre of Spindle to Column | 250 mm |
| Max.spindle to table | 600 mm |
| Max. spindle to base | 980 mm |
| Taper in spindle | M.T.3 |
| Spindle Travel | 250 mm |
| No. of speed | 8 |
| Range of speed | 73 to 1800 RPM |
| Table size. | 375 mm Dia. |
| Base size (machined area) | 350 x 325 mm |
| Overall base size | 625 x 420 mm |
| Overall height with guard | 1675 mm |
| V-Belt section | B-52 |
| Elec. Motor – 1440 RPM | 1 H.P. |
| Wooden Case Size L x W x H | 650 x 500 x 1525 mm |
| Sl. No. SPECIFICATION. | 20 mm | 13 mm |
| 1.Drilling Capacity. | 20 MM | 13 MM |
| 2.Spindle Speed 8 Nos. in R.P.M. | 86-154-260-460-617-1100-1880-3360 | 500-950-1625-2825 |
| 3.Spindle Nose. | Morse Taper No. 2. | 6 J. Tapper |
| 4.Spindle Centre to Column. | 203 mm | 153 mm |
| 5.Spindle Travel. | 130 mm | 75 mm |
| 6.Max. Distance Spindle to Table. | 940 MM | 193 MM |
| 7.Max. Distance Spindle to Base. | 1240 MM | 425 MM |
| 8.Working Surface of Base. | 300×275 MM | 210×190 MM |
| 9.Working Surface of Table. | 280×277 MM | 210×207 MM |
| 10.Column Diameter. | 73.8 MM | 47 MM |
| 11.Machine Base. | 295×275 mm | 352×225 mm |
| 12.Overall Dimension | 1800x380x690 mm | 930x400x400 mm |
| 13.Motor Speed. | 1440 R.P.M. | 1440 R.P.M. |
| 14.Motor 3 Phase Induction A.C. | 0.55 Kw/0.75 HP. | 0.37 Kw/0.5 HP. |
| 15.Weight of Machine (Approx) | 110 Kgs. | 42 Kgs. |
All Geared Radial Drill Machine
HPSM’ manufactures, exports, and supplies Heavy Duty All Geared Radial Drilling Machine. These Geared Radial Drilling Machines are manufactured in compliance with the international standards by our skilled experts. The Geared Radial Drilling Machine, we offer, is manufactured using high-grade components & parts that ensure perfect drilling for large and small jobs. Moreover, the Geared Radial Drilling Machine can be availed at affordable rate.
DESIGN FEATURE
- Main spindle made from EN Steel with 6 slots in machined by hobber and Morse taper bore is provided internally grinded.
- By Simple adjustment of only tapper wedge facility to set drill head on are guide way. Spindle sleeve is properly guided in honed drill head bore on 6 ball & roller bearing for smooth & accurate running.
- Main spindle made from EN Steel with 6 slots in machined by hobber and Morse taper bore is provided internally grinded.
- By Simple adjustment of only tapper wedge facility to set drill head on are guide way. Spindle sleeve is properly guided in honed drill head bore on 6 ball & roller bearing for smooth & accurate running.
- This machine has drilling radius up‐to 820 mm and Distance from base to spindle is up‐to 1040 mm. Due to such facilities we are able to provide good working area at low cost.
STANDARD EQUIPMENTS
- Motor Pulley 2 Nos
- Drill Drift
- Oil Can
EXTRA EQUIPMENTS
- Box‐Table
- Electrical Motors & Control Panel
- V‐belts
- Coolant Pump with Tank & Fittings
| Technical Specifications | HPS – 25 |
| CAPACITY | C.I. |
| Drilling Capacity | 25mm |
| DRILL HEAD | |
| 1. Spindle Nose | MT – 3 |
| 2. Spindle Travel | 200mm |
| 3. No. of Spindle Speed | 8 |
| 4. Range of spindle Speed | 80-1800RPM |
| POWER | |
| Spindle Drive Motor | 1HP 1440 RPM |
| Spindle Drive V-Belt | B-45 |
| WORKING TABLE | |
| L x W x H | 250 x 200 x 200mm |
| WORKING RANGE | |
| 1. Maximum Drill Head Travel | 355mm |
| 2. Distance from Column to Spindle Max. / Min. | 655 / 300mm |
| 3. Distance from base to spindle Max. /Min. | 880 / 175mm |
| 4. Diameter of column. | 130mm |
| BASE PLATE | |
| 1. L x W x H | 1005 x 605 x 125mm |
| 2. G.W./ N.W | |
| 3. Wooden Case Size L x W x H | 1100 x 700 x 1800mm |
| Technical Specifications | HPS-38 |
| CAPACITY | |
| Drilling Capacity | 38mm |
| DRILL HEAD | |
| Morse Taper of Spindle | MT – 4 |
| Spindle Stroke | 200mm |
| No. of Spindle Speed | 8 |
| Range of spindle Speed | 73-1800RPM |
| POWER | V-BELTS |
| Spindle Drive Motor (1.5hp) | B-46 |
| Arm Elevating Motor (0.5hp) | A-23 |
| WORKING TABLE | |
| L x W x H | 300 x 260 x 260mm |
| WORKING RANGE | |
| Drilling Radius Max./Min. | 820/320mm |
| Distance from Column to Spindle Max. / Min. | 745/250mm |
| Max. Drilling Head Travel | 495 |
| Distance from base to spindle Max. /Min. | 1040/250mm |
| Diameter of column | 157mm |
| BASE PLATE (WITH COOLANT TANK) | |
| L x W x H | 1225 x 675 x 135mm |
| Working Surface (L x W) | 740/550mm |
| No. of slots / Size | 3/16mm |
| DIMENSION | |
| Overall Height | 2050 |
| Wooden Case (L X W X H) | 1300 X 750 X 2050mm |
ALL GEARED RADIAL DRILLING MACHINE HPS-5(40MM)
| Technical Specifications | HPS-5(40MM) |
| Description | Capacity & Size |
| Capacity | |
| Drilling Capacity in MS | 40 mm |
| Drilling Capacity in CI | 45 mm |
| Tapping in MS | 25 mm |
| Rough Boring in MS | 60 mm |
| Drill Head | |
| Spindle Nose Tapper | MT – 4 |
| Spindle Travel | 170 mm |
| Number of Spindle Speed | 8 |
| Range of Spindle Speed | 60 to 100 RPM |
| Number of Power Feed | 2 |
| Range of Power Feed | 0.20 – 0. 10 mm Rev |
| Working Range | |
| Drilling Radius Max/Min | – |
| Distance from column to spindle Max/Min | 950 440 mm |
| Distance from spindle base Max/Min | 1150 – 320 |
| Diameter of column | 180 mm |
| Box Table LXWXH | 380 x 300 x 300 |
| Base Plate | |
| Base Plate Area LXWXH | 1350 x 760 x 160 |
| Working Surface | 870 x 630 |
| Number of Size of T-Slot | 3 / 16 mm |
| Power | |
| Drilling Motor ( Two Speed ) | 2 / 1400 Hp / RPM [50 Cycle] |
| 2 / 2800 Hp / RPM [50 Cycle] | |
| Elevation Motor for ARM | 0.5 Hp / 1400 Hp / RPM [50 Cycle] |
| Shipping Size Approx LXWXH | 1750 x 1000 x 2000 |
ALL GEARED RADIAL DRILLING MACHINE ( HPS 45 )
| Technical Specifications | HPS-45 (45MM) |
| Capacity | |
| Drilling Capacity | 45 mm |
| Drilling Head | |
| Spindle Nose | MT – 4 |
| Spindle Travel | 200 mm |
| Number of Spindle Speeds | 8 |
| Spindle Speed Range | 60 – 1350 rpm |
| No. of Power Feeds | 3 |
| Power Feeds Range | 0.10-0.20-0.30 mm / rev |
ALL GEARED RADIAL DRILLING MACHINE HPS 50/1350 (50MM)
| Technical Specifications | |
| Capacity | HPS-50/1350 (50mm) |
| Drilling (M.S.) | 50 mm |
| Drilling (C.I.) | 60 mm |
| Tapping (M.S.) | 24 mm |
| Tapping (C.I.) | 30 mm |
| Boring (M.S.) | 90 mm |
| Boring (C.I.) | 100 mm |
| Drilling Head | |
| Spindle Tapper | MT-5 |
| Spindle Diameter | 85 |
| Spindle Travel | 300 |
| No of Speed | 8 |
| Range of Speed | 30 to 1300 |
| No. of Spindle Feeds | 6 |
| Range of Spindle Feeds | 0.6 to 0.4 mm / rev. |
| Electricals | |
| Power Supply | 3 Ph, 415 V, 50 Hz |
| Drill Power | 3 Hp |
| Arm Elevating Motor Power | 1.5 Hp |
| Coolant Pump Motor Power | 0.15 Hp |
| Working Range | |
| Column Dia | 255 |
| Drilling Radius Max./Min. | 1325 / 445 |
| Distance from Column to Spindle Max/Min | 1200 / 320 |
| Distance from base to spindle Max/Min | 1210 / 400 |
| Max. Drilling Head Travel | 880 |
| Vertical Traveling of Arm | 880 |
| Base Plate working area (L x W) | 1220 x 770 |
| Box Table area (L x W x H) | 600 x 500 x 500 |
| Diamensions | |
| Base Plate (L x W x H) | 1750 x 950 x 220 |
| No. of T – Slot | 4 |
| Over all Dimensions (L x W x H) | 1800 x 1000 x 2450 |
| Wooden case size (L x W x H) | |
| Approximate Weight | 2500 Kg. |
ALL GEARED RADIAL DRILLING MACHINE HPS-65B(65MM)
| Technical Specifications | HPS-65B |
| DRILL HEAD | |
| Drilling Capacity(in steel/in cast iron) | 65/75 |
| Drilling Depth | 325 |
| Taper Spindle Nose Socket | MT-5 |
| No. of Spindle | 12(18-810) |
| No. of Spindle Feeds | 6(0.125to1.25) |
| Drill Power | 3.7 KW |
| CAPACITY | |
| Drilling Radius Max(A) Min(B) | 1700 |
| Drilling Head Traverse (C) | 1200 |
| Distance Base Plate to Spindle Max. (P) Min. (M) | 1500 300 |
| Diameter of Column Sleeve (D) | 8 |
| Range of Speed | 355 |
| Working Surface of the Base Plate G*H | 1500*1020 |
| DIMENSIONS OF BASE PLATE | |
| Length*width*Height(T*U*V) | 2265*1040*225 |