Workshop Machines – Lathe Machines
V Belt Driven lathe
HPSM’ V-Belt-driven lathe Machine is best known for performing in various operations like woodturning, metalworking, metal spinning, thermal spraying, parts reclamation, and glass-working. We are a leading manufacturer and exporter of V-Belt-driven lathe in India and Worldwide.
| V BELT DRIVEN LATHE | |||||||||
| Length of bed | 6ft. | 6½ ft | 8 ft. | 10 ft. | 10 ft. | 12 ft. | 12 ft. | ||
| Width of bed | 330/13 | 356/14 | 406/16 | 457/18 | 508/20 | 508/20 | 559/22 | ||
| Height of centre | 254/10 | 305/12 | 356/14 | 406/16 | 457/18 | 457//18 | 508/20 | ||
| Spindle bore | 54/2½ | 76/3 | 79/3½ | 105/4½ | 105/4½ | 114/4½ | 114/4½ | ||
| No. of spindle speeds | 6 | 6 | 6 | 6 | 6 | 6 | 6 | ||
| Moese Taper | 3 | 4 | 4 | 4 | 5 | 5 | 5 | ||
| Admit b/w centres mm/inch | 1000/39 | 1092/39 | 1499/59 | 1778/70 | 1775/70 | 2286/90 | 2286/90 | ||
| Swing over Saddle mm/inch | 356/14 | 3483/19 | 559/22 | 610/24 | 711/28 | 711/28 | 711/28 | ||
| Swing in Gap mm/inch | 699/27.5 | 889/35 | 1066.8/42 | 1270/50 | 1372/54 | 1372/54 | 1575/62 | ||
| Length of gap in front of face plate | 229/9 | 279/11 | 381/15 | 254/10 | 279/11 | 305/54 | 305/12 | ||
| Lead Screw Pitch | 2/4 | 2/4 | 2/4 | 2/4 | 2/4 | 2/4 | 2/4 | ||
| Motor H.P required | 2 | 2 | 3 | 3 | 5 | 5 | 5 | ||
| Approx Weight | 1000 | 1100 | 1500 | 2450 | 2800 | 3000 | 3700 | ||
Capstan Lathe
HPSM’ Capstan Lathes are productive machines, suitable for Turning, Drilling, Boring, and Facing & Threading with full Norton Gear Box with Semi-Skilled operating pieces of Jaw Chuck. Being a leading manufacturer of Capstan Lathes, we have dedicated workforce of highly trained professionals in their fields.
Having Hand & Auto longitudinally as well as Transverse feed. Threading range 4 to 60 T.P.I. through full Norten Gear Box, 4 speed is provided self shaft for fine & rough turning for Cross Slide & Turret feed. Also longitudinal stop provided.
STANDARD ACCESSORIES
Introduction
Capstan Lathes are productive machines, suitable for Turning, Drilling, Boring, Facing & Threading with full norton Gear Box with Semi-Skilled operating pieces of Jaw Chuck.
Cross Slide
Having Hand & Auto longitudinally as well as Transverse feed. Threading range 4 to 60 T.P.I. through full Norten Gear Box, 4 speed is provided self shaft for fine & rough turning for Cross Slide & Turret feed. Also longitudinal stop provided.
Head Stock
All geared & running parts of Head Stock are Heat-Treated & Ground Mounted on Heavy Duty Tapered Roller Bearings & runing in oil bath.
Turret Head
The Turret Slide is provided with longitudinal power feed & hand operated feed. Longitudinal stop is also provided & the Stop Rod revolves automatically together with the rotating Turret Head.
SALIENT FEATURES
- Hardened & Ground standarised spindle with standard fitting of A-20. Compact design for small components.
- Taper nose handened & Ground alloy steel spindle with precision run out. Well ribbed & ground ways of bed. Multi disc friction clutch of 8 kgf. is provided in head stock for quick variation in speed.
- Hand operated dead length bar Chuck, One collet, Cross Slide with two tool posts. Bar feed, Spalash guard, Spanner set, Allenkey set.
- Hardened & ground standarised spindle with standard fittings of A-25. Precision Run out. back Operated Center.
- Spindle with Standardised fittings & A-40 collet with 6 speed head stock fitted with friction clutch. Well ribbed & Ground ways of Bed.
- Standarised Spindle with Standard fittings of A-25. Well Ribbed & Ground ways of Bed.
STANDARD EQUIPEMENT
- Hand operated dead length bar Chuck, One collet, Cross Slide with two tool posts. Bar feed, Spalash guard, Spanner set, Allenkey set.
- One couplin 165mm for Spindle taper nose, Cross slide with two tool posts, Manual turret, Spanner set, Allenkey set, oil cane and Motor pulley.
EXTRA EQUIPMENT
- Vertical Slide
- Chuck Plate
- Coolant Pump & its fittings & Panel Board
- 2 h.p. isi marked Motor
- Screw Operated tail stock
- Coolant Pump
- Panel Board
- Bar Feed Attachment
- Collet Chuck
- 3 h.p. isi marked Motor
- Feed for turret slide
| Technical Specifications | ||||||||
| HPS-60G | HPS-50G | HPS-40G | HPS-32G | HPS-25G | HPS-25S | HPS-20S | ||
| Spindle Hollow | 62 | 52 | 42 | 38 | 32 | 28 | 25 | |
| Maximum Collet Capacity | 60 | 50 | 40 | 32 | 25 | 25 | 20 | |
| Range of Spindle Speeds | 90-1000 | 100-1050 | 165-1500 | 165-1500 | 275-900 | 650-1660 | 650 x 1660 | |
| Effective Strokes of Turret Slide | 180 | 175 | 140 | 140 | 130 | 110 | 100 | |
| Bore Size in Turret Hex Head | 32 | 32 | 32 | 25 | 25 | 25 | 25 | |
| Center of Holes above Turret Slide | 55 | 55 | 55 | 55 | 55 | 55 | 55 | |
| Max. distance between spindle nose to turret face | 430 | 430 | 425 | 425 | 400 | 375 | 300 | |
| Cross slide Transverse Travel | 150 | 150 | 95 | 95 | 95 | 95 | 95 | |
| Cross Slide Longitudinal | 300 | 300 | 300 | 300 | 300 | 300 | 300 | |
| Length of Bed | 1375 | 1375 | 1225 | 1225 | 1275 | 1050 | 980 | |
| Width of Bed | 230 | 230 | 178 | 175 | 178 | 178 | 178 | |
| Height of Center above Bed | 190 | 190 | 165 | 165 | 165 | 165 | 165 | |
| Floor Space required | 3m x 1m | 3m x 1m | 3m x 1m | 3m x 1m | 3m x 1m | 2.5m x 1m | 2.5m x 1m | |
| Net Weight of Machine | 1850 | 1850 | 1250 | 1150 | 850 | 650 | 500 | |
| Packing Size (Approx) | 5 x 3 x 5 fts. | 5 x 3 x 5 fts. | 5 x 3 x 5 fts. | 5 x 3 x 5 fts. | 4.5 x 3 x 5 fts. | 4 x 3 x 5 fts | 4 x 3 x 5 fts. | |